Comment Hacker un iPhone pour utiliser une carte Sim Européenne

août 6, 2007

Comment Hacker un iPhone pour utiliser une carte Sim Européenne

Categories: Hi-Tech

par Romain

C’est en Macédoine que l’iPhone vient d’être hacké pour l’utilisation de l’iPhone sur le réseau Européen. Le Hack permet grâce à une dupliction de carte Sim européenne d’utiliser tout les services, tel que recevoir et emettre des appels (ouf) les sms et l’accés au réseu EDGE

On retrouve sur le Forum Hackintosh l’explication complète.

Warning! Proceed at your own risk! Your provider can block your subscription!

Thanks to Vladimir,OZ, and all good people who figured this out! Let’s start….

U will need::

1. iPhone biggrin Comment Hacker un iPhone pour utiliser une carte Sim Européenne
2. SIM Reader/Writer (Infinity USB Unlimited, Dynamite Programer(I used this) ,etc…)
3. SilverCard
4. V1 SIM card (U must be able to get Ki number)
5. Download - http://simemu.gsmhosting.net/SIM_EMU_6.01_CFG_v2.1.zip
- http://www.kinforce.com/down/kinforc…rsim/ws109.zip

::Preparing your iPhone::

:Jailbreak:

Step 1
MAC - http://www.hacktheiphone.com/iphone_…dding_mac.html
WIN - http://www.hacktheiphone.com/iphone_…g_windows.html

Step 2
For already “fake activated” iPhones ,u need to have the AT&T SIM that it came with iPhone in it to get deactivation to work.

MAC - http://www.hacktheiphone.com/iphone_…intel_mac.html
WIN - http://www.hacktheiphone.com/iphone_…r_windows.html

After this steps U will have an “SuperSim compatible iPhone”.

::Getting IMSI,ICCID & Ki number from your SIMs::

Step 1 - Your SIM

1. Put YOUR SIM card in programer
2. Run Woronscan
3. Click on “Tasks” then on “IMSI select” u will get a IMSI number, write it down.
4. Click on “Tasks” then on “Ki search”, in pop-up window just click “Search”, and wait,Ki extraction has began.(I was waiting for mine 40 min ) When u get it, write it down.

Step 2 - Getting IMSI,ICCID from AT&T SIM card which came with an iPhone

1. Put your AT&T SIM card in programer
2. Click on “Tasks” then on “IMSI select” u will get a IMSI number, write it down.
3. Click on “Tasks” then on “ICC select” u will get a ICCID number, write it down.
4. Close Woronscan
5. Remove SIM from programer

Now U have all “data” to make SuperSim.

::Making SuperSim::

1. Download & extract
http://www.rapi****re.com/files/4693….01_iPhone.rar
1.a Put your Silvercard in programer
2. Run Sim-Emu 6.01 Configurator v2.1
3. Click on Configure tab
4. Click “Read from disk” button
5. Browse to your downloaded Flash&EEPROM files, first double click on SIM_EMU_6.01_iphone.HEX and then double click on SIM_EMU_6.01_iphone_EP.HEX, now they are loaded,positions 0 and 9 are red colored,thats fine.

6. In position 0 , type in YOUR SIM IMSI and Ki, then a AT&T ICCID, for ADN/SMS/FDN# type 161, 15, 4, for SMS Centre type in your carrier SMS center number.

7. Now select position 9, here type only IMSI from AT&T SIM card, NOTHING ELSE!
8. In “Config mode” check “Card” circle button
9. Click on “Write to card” button,when its done, remove card from programer
10. http://www.mobileshop.org/usertech/simcutting.htm
11. Power OFF your iPhone
12. Put your SuperSim in iPhone
13. Power ON iPhone, enjoy!

source